ALUTECH Logo

AluPro Panoramic Doors

For premises with high humidity

Wide choice of glazing types and additional options

  • Panoramic panels of aluminum profiles 45 mm thick
  • Components from stainless steel
  • Basic spring resource up to 25 000 open/close cycles
  • Extended spring resource up to 100 000 open/close cycles
  • 10 mounting types
  • Doors maximum size of 7000x6000 mm
  • Any door size with height and width increments of 5 mm
  • Safety systems included in a standard set
  • 10 standard colors
Panoramic doors in assortment

Types of door leaf

ALP

  • A door leaf filled with panoramic panels.

ALPS

  • A door leaf from panoramic panels with a 45 mm thick bottom panel (you can choose S-ribbed or Microwave panel).

PO

  • A door leaf from ProPlus sandwich panels with one or several panoramic panels.

Panoramic doors with full glazing

Panoramic doors are specially designed for the premises where it is important to have access to daylight – a wonderful solution to make an exposition of goods and services in car dealerships and shops more attractive.


The doors up to 3000 mm wide are manufactured without an impost.

The doors up to 5000 m wide can be manufactured with one impost.

Types of panoramic panels

Double glazing 26 mm

Silver aluminum, close to RAL 9006

Single glazing 3 mm

Silver aluminum, close to RAL 9006

Composite aluminum panel 26 mm

Silver aluminum, close to RAL 9006

Composite aluminum panel 3 mm

Silver aluminum, close to RAL 9006

   Doors with double glazingм 26 mm   Doors with single glazingм 3 mm   Doors with composite infill 26 mm   Doors with composite inserts 3 mm
White (RAL 9016)        
Sepia brown (RAL 8014)
Silver aluminum (RAL 9006)
Chocolate (RAL 8017)
Grey anthracite (RAL 7016)
Green moss (RAL 6005)
Gentian blue (RAL 5010)
Wine red (RAL 3004)
Light ivory (RAL 1015)
(Anode) silver (A00-D6)
10 standard RAL-colors RAL
Additional options

AluPro panoramic doors have several practical options:

Inbuilt wicket door

A wicket door gives the owner an additional entrance. So you can enter the premises without opening the door itself. The option is a convenient solution for everyday use, and helps to save on the doors operating life.

One of the three types of the wicket doors available for AluPro doors will be suitable for specific conditions:

With standard threshold
(for doors from 4,5 to 7 m wide)

- Linear door closer;
- Inbuilt sensor detectingwicket position;
- Rain visor;
- Metal handles;
- Special device eliminates sagging of the wicket during use;
- Threshold:
    - 149 mm for ALP series
    - 145 mm for ALPS series

With low 100 mm threshold
(for doors up to 4,5 m wide)

- Linear door closer;
- Inbuilt sensor determines wicket position;
- Rain visor;
- Metal handles;
- Special device eliminates sagging of the wicket during use;
- For doors of ALPS series.

With flat 20 mm threshold
(for doors up to 5 m wide)

- Linear door closer;
- Inbuilt sensor determines wicket position;
- Rain visor;
- Metal handles;
- Special device eliminates sagging of the wicket door.

Wicket framing has two standard colours – brown and silver. Alternative colours are represented in the RAL-catalogue.

Grid filling

Panoramic doors with grid filling is an ideal solution for the premises in which constant airing is needed. They will be in demand at the parking lots. You can choose from three types of grids: steel drawn grid; steel grid; perforated aluminum sheet.

Locking system

Locking mechanism is offered for premises without an additional entry. It allows to open and close the doors from the inside as well as from the outside.
For panoramic doors of ALPS and PO types.

Side door

A side door and panoramic doors have similar design and fit harmoniously into the facade of the building, perfectly complementing each other.

Components for premises with extreme humidity

ALUTECH design engineers have developed special set of components for doors to be operated at car washes and other premises with extreme humidity. Cables, fixings and roller’s shafts are made of stainless steel and coated with protective paint-and-lacquer coating.

Antiburglar protection

With anti-jacking protection device your doors are protected from burglars. This device will block the door leaf in case of unauthorized lifting.

Glazing resistant to scratches

SAN-plastic with special antiabrasive coating is used to protect glazing from possible damages (scratches) during operation of the doors. Such coating keeps the glazing transparent for a long period of time even after multiple cleaning. Available for 26 mm double glazing.

Technical parameters
Balance
system		 Torsion springs
Panel
thickness		 45 mm
Components
(intermediate hinges and roller brackets)		 Stainless steel
Door
dimensions (max)		 7000 mm wide, 6000 mm high
Glazing
options
Double glazing 26 mm
Single glazing 3 mm
Composite aluminum panel 26 mm
Composite aluminum panel 3 mm
Door
leaf type
ALP
fully
panoramic
ALPS
bottom panel – 45 mm sandwich panel,
others – panoramic
ПО
one or several panoramic panels,
others – sandwich panels
Inbuilt
wicket door		 All types of the door leaf (ALP, ALPS, PO)
Mounting
type		 10 types
Headroom
height (min)
230 mm
For doors
without electric drive
Basic
spring resource
Up to 25 000 «open-close» cycles
Standard set
50 000, 75 000, 100 000 «open-close» cycles
Upon request

Types of mounting

  • Standard mounting
    Low mounting
  • High mounting with top shaft positioning
    High mounting with bottom shaft positioning
    Vertical mounting with top shaft positioning
    Vertical mounting with bottom shaft positioning
  • Inclined mounting
    Inclined low mounting
    Inclined high mounting with top shaft positioning
    Inclined high mounting with bottom shaft positioning