ALUTECH Logo

ProTrend Industrial Doors

Reasonable price

For regions with moderate climat

For unheated premises

  • Sandwich panel 40 mm thick
  • Components from galvanized steel
  • Spring basic resource up to 25 000 open/close cycles
  • Spring extended resource up to 100 000 open/close cycles
  • 10 types of mounting
  • Doors maximum size of 7000x6000 mm
  • Any size with height and width increments of 5 mm
  • Safety systems included into the standard set
40 mm sandwich panels in assortment

Durable and reliable panel

  • Closed-circuit construction

    Both outer and inner steel sheets are interlocked at the top and bottom (where the 4-layer metal construction is fixed). It protects the panel from delamination in the sun (important for dark-colored doors and operation in south regions).

  • Protection against finger trapping

    Alutech panels comply with one of the main European safety standards: they eliminated finger trapping (comply with EN12604).

  • Good adhesion of steel sheets and foam

    Adhesive lacquer coating (of 12 microns) provides good adhesion of steel sheets and foam. So the design engineers have eliminated bubbling of the panel under the sun.

  • Perfect anticorrosion properties

    Primer and zinc layers of 14-16 and 16 microns ensure perfect anticorrosion properties of sandwich panels.

  • Durablecoating

    The external surface of a panel has a polyurethane coating with integrated polyamide particles (PUR-PA). It protects from scratches and increases overall resistance to corrosion.

  • Optimalthermalinsulation

    Optimal thermal insulation. Thermal transmittance of Alutech doors is 1,35 W/m²K.

Design of a 40 mm sandwich panel

Microwave

Sepia brown, close to RAL 8014

S-ribbed

Sepia brown, close to RAL 8014

   Microwave   S-ribbed
Woodgrain embossing Woodgrain embossing
White (RAL 9016)    
Sepia brown (RAL 8014)
Silver aluminum (RAL 9006)
Chocolate (RAL 8017)
Grey anthracite (RAL 7016)
Green moss (RAL 6005)
Gentian blue (RAL 5010)
Wine red (RAL 3004)
Light ivory (RAL 1015)
Anthracite (ADS 703)
10 standard colours RAL
Additional options

ProTrend industrial doors have several practical options:

Inbuilt wicket door

This type of wicket doors is ordered if the owner needs an additional entrance inside. It allows to enter the garage without opening the door itself, and increases the door’s endurance. The option provides maximum convenient operation.

Alutech range of products is represented by 3 types of wicket doors:

With standard threshold of 145 mm
(for doors from 4,5 to 7 m wide)

- Linear door closer;
- Inbuilt sensor detecting the wicket position;
- Rain visor;
- Metal handles;
- Special door catch eliminates the wicket sagging during use.

With low 100 mm threshold
(for doors up to 4,5 m wide)

- Linear door closer;
- Inbuilt sensor detecting the wicket position;
- Rain visor;
- Metal handles;
- Special door catch eliminates the wicket sagging during use.

With flat 20 mm threshold
(for doors up to 5 m wide)

- Linear door closer;
- Inbuilt sensor detecting the wicket position;
- Rain visor;
- Metal handles;
- Special door catch eliminates the wicket sagging  during use.

Wicket framing has two standard colors – brown and silver. Alternative colors are represented in the RAL-catalogue.

Inbuilt windows

Inbuilt windows allow to save on electricity costs for production departments. In Alutech range of products there are various types of glazing for industrial doors.

Locking system

A locking mechanism is offered for premises without an additional entry. It allows to open and close the doors from the inside as well as from the outside.

Side door

A side door and sectional doors have similar style and harmoniously fit the facade of the building, perfectly complementing each other. A wicket door is made of panels of the same design and color as that of sectional doors.

Panoramic glazing

A couple of panoramic panels – and a new design of your doors is ready. You will get much more visibility and light in comparison with inbuilt windows.

Antiburglar protection

With anti-jacking protection device your doors are protected from burglars. This device will block the door leaf in case of unauthorized lifting.

Technical parameters

With torsion springs

Balance
system		 Torsion springs
Sandwich panel
thickness		 40 mm
Components
(intermediate hinges and roller brackets)		 Galvanized steel
Door
dimensions (max)		 7000 mm wide, 6000 mm high
Mounting
type		 10 types
Headroom
height (min)		 230 mm (low mounting)
Spring basic
resource
Up to 25 000 «open-close» cycles
Standard set
50 000, 75 000, 100 000 «open-close» cycles
Upon request

Types of mounting

  • Standard mounting
    Low mounting
  • High mounting with top shaft positioning
    High mounting with bottom shaft positioning
    Vertical mounting with top shaft positioning
    Vertical mounting with bottom shaft positioning
  • Inclined mounting
    Inclined low mounting
    Inclined high mounting with top shaft positioning
    Inclined high mounting with bottom shaft positioning