Alutech SL

Technical characteristics

Maximum load capacity – 60 kN (6 tons)
2 hydraulic lift cylinders
Outer diameter of main platform and lip cylinders – 50 mm
Hydraulics from European manufacturer
Lip length – 400 mm
Leveller steel thickness – 6/8 mm
Lip steel thickness – 12/14 mm
4 models: S, W, C, B
Control unit CUL01 in the set
Control unit safety class – IP54
Length of supply cables for hydraulic station – 7 m
Supply voltage – 400 V

Dimension chart

Leveller length, mm	Leveller width	Leveller height	Top end position	Bottom end position
2 000	1750, 2000, 2250	600	265	295
2 300	1800, 2000	600	320	280
2 500	1750, 2000, 2250	600	325	295
3 000	1750, 2000, 2250	700	390	290
3 500	1750, 2000, 2250	800	450	390
4 000	1750, 2000, 2250	900	510	390
4 500	1750, 2000, 2250	900	570	380

Advantages

	HIGH LEVEL OF SAFETY. Two lift cylinders in standard set ensure protection from imbalance in case of sudden truck departure.
	RELIABLE HYDRAULICS. All the components of hydraulic system are supplied by European manufacturers.
	DURABILITY AND RIGIDITY. 6/8 mm thick steel sheet and reinforcing plates allow to withstand the load of 6 tons.
	COMPLIANCE WITH STANDARDS. The leveller complies with all relevant European standards, Technical requirements of the Customs Union and the Ukrainian national standards.
	EXTENDED WARRANTY. We are confident in the new product quality and provide an extended 10-year warranty from perforating corrosion.
	100% QUALITY CONTROL. Every dock leveller undergoes preshipment tests on special test stand where performance of all systems is checked.
	SHORT TERM OF DELIVERY. Own production ensures minimum term of delivery – 5-6 weeks only.
	COMPETITIVE PRICE. The leveller is much cheaper than the alternatives from European manufacturers, and the price difference, if compared with Russian manufacturers, is minimum.
	QUICK MAINTENANCE. Own production allows quick delivery of repair components and eliminates equipment downtime.

Safety systems

Emergency lock system for hydraulics;
Cylinder lock in case of abrupt truck departure;
Special rod used to relieve the front support beam in case of truck departure during loading;
Protective side sheets used to ensure protection from foot trapping;
Safety marks – black-and-yellow stripes;
Safety support for maintenance operations.

Optional extras


S = 125 mm	Side bevels on the lip allow to handle vehicles with various body widths.
S = 125 mm	Segmented lip consists of the main section and two side segments. During obstacle encounter the segments fold, thus allowing to handle vehicles with narrow body type.
	Painting in special RAL-colour allows to maintain Customer’s corporate style.
	Low temperature oil (operating temperature range from -40 °C) makes it possible to use the equipment in harsh climatic conditions.

Models of Alutech dock leveller

The most suitable model is selected depending on the stage of construction and special features of the facility. The table below will help you to select the dock leveller model. If you have other questions, please contact our regional offices for more detailed information.

Mounting type	Stage of construction	Pit preparation	Concrete pouring	Welding	Groove for tail lift
S	After finishing	+	-	+	+
W	After finishing	+	-	+	+
C	Before permanent floor pouring	+	+	+	+
B	Start	-	+	+	+


	Model S is a most popular and required model due to easy pit preparation and fast mounting. Customer needs to make preliminary pit preparation according to the drawings. The leveller is fixed by welding of the angle profile to the pit angle on the back, and on the front – by welding the brackets (included in the kit) and plates embedded into concrete on the sides of the pit. Bolt fixture ensures fixing of the front support beam to the brackets. Advantages of S mounting type: Easy and fast Mounting after all the construction works are finished Groove for tail lift
	Model W ensures easy and convenient mounting after the construction works are done. Leveller frame has angles designed to fit it in the pit. Before mounting the Customer should embed the angles along the pit perimeter for 10 mm into concrete. Leveller frame is welded to the pit angles and is levelled with the permanent floor. Advantages of W mounting type: Easy and fast Mounting after all the construction works are finished Groove for tail lift
	Model C requires preliminary pit preparation in the building basement. Steel bars are concreted along the pit perimeter. Leveller frame has special anchors which are to be welded to the steel bars. After that, permanent concreting is performed. Concreting height – up to 100 mm. Advantages of C mounting type: Possibility to level the dock leveller Possibility to mount the leveller before permanent floor pouring Groove for tail lift
	Model B is used at an early stage of construction. Leveller frame is welded to the basement reinforcement, then the surface around the leveller is poured with concrete. Closed box eliminates concrete flow under the leveller. Advantages of B mounting type: Does not require preliminary pit preparation Mounting at an early stage of construction Groove for tail lift