ALT110 system of office partition walls has a number of unique features and characteristics.

1. The partition is assembled with the help of steel angles fixed with self-tapping screws, without preliminary drilling of the profiles. (fig.1):
   • Use of steel angles enables the installation of transoms without step-by-step assembly even if the mullions have already been installed.
   • Grooves in the angles allow to set transom horizontal without the necessity to drill additional holes in the mullion.
   • Mullion can be fixed to the floor and the ceiling with the help of the angle.
   • Use of steel angles allows to cover assemblers’ mistakes up to 5cm during cutting of transoms.
   • Steel angle has an opening for the shutters rope.
2. Infill units are fixed with the help of locking clamps
3. It is possible to install single and double transparent and non-transparent infill units. (fig.1)
   • Glass of 4,5,6 and 8 mm thick.
   • Gypsum plasterboard, flakeboard, MDF any other materials from 4 till 16 mm thick.
4. It is possible to install shutters of various types, from 16 to 26 mm thick (fig.3)
5. Rotary profiles allow to assemble any angles in the construction (from 90° to 270° (fig.4)
6. It is possible to install single- and double-leaf doors with single or double infill units.